Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Dashboard
Wi-fi Quick Connect: Enabling this will show the VIA_ SSID & Password UI. It has
the two fields, first for SSID with a prefix ‘VIA_’ and second for Password. It will have
the SSID limit set to 10 characters and password length of max 8 Characters.
Figure 103: Wifi Quick Connect
• Select the channels at which the Wi-Fi SSID will be broadcasted (2 frequencies will be
available – 2.4 GHz and 5GHz), you can select one of them as per the requirement.
2. Select Enable Internet if your VIA Connect² device is connected to a network with
internet.
-OR- Select Activate Standalone Wi-Fi to create an autonomous network without
Internet access.
3. Select AP Isolation to prevent Wi-Fi users from connecting to other through the router.
Each user gets a private connection that protects them from harm by malicious users.
4. Click Apply; The secure wireless guest access point is set up.
To Next Page
Loading...
