Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Dashboard
Wi-Fi with Client Mode
VIA Connect² enables you to wirelessly connect your VIA Connect² device as a client device
to your main network. Use this option if you have no LAN connection available.
To set up Client Wi-Fi mode:
1. See Wi-Fi Settings on page 85
.
2. In the Wi-Fi tab, enable Wi-Fi (the switch turns green).
3. Click the Client Mode tab.
Figure 104: Client Mode
4. If you do not see the desired network, click Click Here to Scan all Networks.
5. You’ll see two options: Hidden Network and Enable Dual Network.
Hidden network - You need to enter the SSID manually. To connect to hidden
network, SSID needs to be known to you. Wi-Fi name will be Hidden Network.
Enable dual network: You will be able to connect with 2 networks (Wi-Fi and LAN).
6. Select a network. Enter the network password and click Apply.
7. Disconnect the LAN cable (if connected) and reboot the device.
Client Wi-Fi Mode is set up.
To Next Page
Loading...
