To connect your VIA GO as a client device to your main network while
simultaneously using the LAN primary network:
1. Browse for and select an available network.
2. Enter the required password.
3. Select the Enable Dual Network checkbox
4. Click Apply.
5. Make sure that the LAN cable is connected.
6. Reboot your device.
A message appears on the main display informing you that your system is
configured with Dual Network mode.
7. Go to the web settings (section 7.2.8.3) to customize your VIA Home screen
with the 2 network names.
Notes:
When leaving this client mode to switch to another network option, make
sure to connect a LAN cable to the RJ-45 connector of your VIA GO.
If your network is hidden, you can select the “Hidden Network” checkbox
to manually type your Wi-Fi SSID name:
To Next Page
Loading...
