Kramer VIA GO

VIA GO - Configuring VIA GO
67
7.2.11 Defining Advanced Settings
To define advanced settings:
1. Click Advanced on the VIA Settings subtab menu (see section 7.2.8).
The Advanced settings screen appears.
Figure 42: VIA Settings > Advanced Settings
2. In the VIA Gateway Audio Output section, select the required type of audio
output.
3. In the API Setting Command section, select one of the following:
 Secure – API commands can be sent to the VIA gateway securely over
a TLS port.
 Non-Secure – API commands can be sent to the VIA gateway on a non-
secure, plain text port. Select this option if your controller does not
support TLS.