7.2.12 Configuring Moderator Access
In this section, you can activate Moderator mode. In this mode, a participant
requires permission from the moderator to use the “Present” function on VIA GO.
To enable Presentation Mode:
1. Select Activate Basic Moderator Mode.
2. Type a password to be used by the participants who request to be a
moderator (optional).
3. Click Apply and reboot VIA GO.
To login into the VIA GO client when basic moderator mode is activated:
1. Open the VIA GO client and enter the location (IP address of the VIA GO
gateway).
2. Enter the nickname. The Room Code field appears.
3. Enter the room code (if Room Code is active).
To Next Page
Loading...
