Additionally, it defaults to allow one iOS device to be mirrored to VIA GO
simultaneously. This setting can also be changed. Once these setting changes are
made, click Apply. Reboot VIA GO to allow the settings to take effect.
To enable Chrome support, it is required to activate the Chrome Settings in
order to allow Chrome Authentication Server connection.
7.2.8.2 QR Code Scanning
1. Click Display in the menu of the VIA Settings screen.
The Display settings screen appears.
2, Check “Enable QR code” and “Bypass room code” (if required) and click
Reboot.
3, Select “Keep QR code always on top” to allow the QR to be always visible
on top of any content presented on main display.
4, Select “Print QR Code” to get a hard copy of it for displaying it in the room.
5, To relocate the QR code on the VIA main display, click and drag it with the
mouse and drop it anywhere on the screen.
6, To resize QR code, click and drag it from the code frame to any desired
size:
7.2.8.3 Customizing the VIA Home Screen
The VIA GO embedded web pages enable you to change the position and color of
elements of the VIA Home screen (Figure 5) and to display a customized DNS
(Domain Name System) name if local DNS services are supported by the network.
To customize the VIA Home screen:
To Next Page
Loading...
