Kramer VP-440

Kramer Electronics Ltd.
VP-440 – Protocol 3000
49
FACTORY
Functions
Permission
Transparency
Set:
FACTORY
End User
-
Get:
-
-
-
Description
Syntax
Set:
Reset device to factory defaults configuration
#FACTORY␍
Get:
-
-
Response
~nn@FACTORY␠OK␍␊
Notes
This command deletes all user data from the device. The deletion can take some time.
HDCP-MOD
Functions
Permission
Transparency
Set:
HDCP-MOD
Administrator
Public
Get:
HDCP-MOD?
End User
Public
Description
Syntax
Set:
Set HDCP mode
#HDCP-MOD␠P1,P2,P3␍
Get:
Get HDCP mode
#HDCP-MOD?␠P1,P2␍
Response
Set / Get: ~ nn@HDCP-MOD␠P1,P2,P3␍␊
Parameters
P1 (Input/Output) – 0=Input; 1=Output
P2 (Scaler number) – Input 0-3=HDMI 1 – HDMI 4; Output 0-1=HDMI, HDBaseT
P3 (Status) – Input: 0=Off; 1=On; Output: 2=Follow In, 3=Follow Out
Response triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-MOD was set any other external control device
(button press, device menu and similar) or genlock status changed
Notes
Set HDCP working mode on device input:
HDCP supported – HDCP_ON [default]
HDCP not supported – HDCP OFF
HDCP support changes following detected sink – MIRROR OUTPUT
HELP
Functions
Permission
Transparency
Set:
-
-
-
Get:
HELP
End User
-
Description
Syntax
Set:
-
-
Get:
Get command list or help for specific command
2 options:
1. #HELP␍
2. #HELP␠command_name␍