Kramer VP-440

Kramer Electronics Ltd.
VP-440 – Protocol 3000
50
IMAGE-PROP
Functions
Permission
Transparency
Set:
IMAGE-PROP
End User
Public
Get:
IMAGE-PROP?
End User
Public
Description
Syntax
Set:
Set the image size
#IMAGE-PROP␠P1␍
Get:
Get the image size
#IMAGE-PROP?␠P1,…,P6␍
Response
Set / Get: ~ nn@IMAGE-PROP␠P1,P2….␍␊
Parameters
P1 (Scaler number) – 1=Scaler
P2 (Status) – 0=Over Scan; 1=Full; 2=Best Fit; 3=PanScan; 4=Letter Box; 5=Under 2; 6=Under 1
Response triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
After execution, response is sent to all com ports if CMD-NAME was set any other external control device
(button press, device menu and similar) or genlock status was changed
Notes
Sets the image properties of the selected scaler
LOCK-FP
Functions
Permission
Transparency
Set:
LOCK-FP
End User
-
Get:
LOCK-FP?
End User
-
Description
Syntax
Set:
Lock front panel
#LOCK-FP␠P1␍
Get:
Get front panel lock state
#LOCK-FP?␍
Response
nn@LOCK-FP␠P1␠OK␍␊
Parameters
P1– 0=No; 1=Yes