Krone Big Pack 890 XC - Technical Data; Big Pack 890;XC

I - 2
General Information
1.4.1 Big Pack 890/XC
The technical data specified in the table refer to the basic version of the machine in each case.
Deviations (e.g. due to additional attachments, etc.) are not included in this table.
1.4 Technical Data
*
3
50 km/h with tandem axle braked
40 km/h with tandem axle unbraked
Big Pack 890 Big Pack 890 XC
Single-axle Tandem Single-axle Tandem
Permissible maximum speed 40 km/h 50km/h*
3
40 km/h 50km/h*
3
Length of working position (mm) 9180
Length of transport position (mm) 7930
Height [mm] 3075
Weight [kg]) 6580 6950 7480 7850
500/50-17 500/50-17
Tyres 500/55-20 500/55-20
700/45-22.5 560/45 R22.5 700/45-22.5 560/45 R22.5
620/40 R22,5 620/40 R22,5
Width [mm] 2600 2550/2560/2605/2670 2600 2550/2560/2605/2670
Tyre pressure [bar 1,5 2,4 bei 17" 1,5 2,4 bei 17"
1,8 ( 20" / 22,5") 1,8 ( 20" / 22,5")
Track width [mm] 1820 2040 1820 2040
Baling channe Height (mm) 900
Width (mm) 800
Baling length [mm] from 1000 to 2700 (continuously adjustable)
Scattering width [mm] 1950
Number of knotter devices 4
Power requirement 75 KW (102 PS) 90 KW (122 PS)
Cutting system
(number of blades) -16
Friction clutch drive 1800 Nm
Flywheel overload coupling Wedge switch 4500 Nm
Pick-up overload coupling Star ratchet 800 Nm Star ratchet 1000 Nm
Cam-type cut-out clutch for cutting
system - 7000 Nm
Packer overload coupling Cam-type cut-out clutch 14500 Nm
Needle connecting rod Shear screw M 10 x 55 DIN 931-10.9