Krone Big Pack 890 XC - Big Pack 1270;XC;Multibale

I - 3
General Information
1.4.2 Big Pack 1270/XC/MultiBale
The technical data specified in the
table refer to the basic version of the
machine in each case. Deviations (e.g.
due to additional attachments, etc.) are
not included in this table.
*
1
Rigid
*
2
Guided coast-down
*
3
50 km/h with tandem axle braked
40 km/h with tandem axle unbraked
Big Pack 1270 Big Pack 1270 XC
Single-axle Tandem Single-axle Tandem
Permissible maximum speed 40 km/h 50km/h*
3
40 km/h 50km/h*
3
Length of working position (mm) 9180
Length of transport position (mm) 7930
Height (mm) 2875
Weight (kg) 7240 7610 8430 8800
500/50-17 500/50-17
Tyres 700/45-22.5 500/55-20 700/45-22.5 500/55-20
560/45 R22.5 560/45 R22.5
620/40 R22,5 620/40 R22,5
Width (mm) 2995
Tyre pressure (bar) 1,5 2,4 bei 17" 1,5 2,4 bei 17"
1,8 bei 20" / 22,5" 1,8 bei 20" / 22,5"
Track width (mm) 2200 2250*
1
2350*
2
2200 2250*
1
2350*
2
Baling channel Height (mm) 700
Width (mm) 1200
Baling length (mm) from 1000 to2700 (continuously adjustable)
Scattering width (mm) 2380
Number of knotter devices 6
Power requirement 80 KW (109 PS) 95 KW (129 PS)
Cutting system
(number of blades) -26
Friction clutch drive 1800 Nm
Flywheel overload coupling Wedge switch 4500 Nm
Pick-up overload coupling Star ratchet 800 Nm Star ratchet 1000 Nm
Cam-type cut-out clutch for cutting
system 7000 Nm
Packer overload coupling Cam-type cut-out clutch 14500 Nm
Needle connecting rod Shear screw M 10 x 55 DIN 931-10.9