Krone Big Pack 890 XC - Rollers and Cam Follower Rollers on the Packer Strips

IX- 13
Care and Maintenance
9.8.3.2Rollers and Cam Follower Rollers on
the Packer Strips
Packer strips can be lubricated through the openings (5)
on the left side of the machine.
To do this:
• Go to the platform (2) on the drawbar and turn the
flywheel (1) far enough in the work direction so that
the mark (3) (on the packer lever) matches the mark
(4) (on the cam disc).
• Lubricate the first 2 packer strips
• Repeat the process 2 more times
There is a setting in which only one
packer strip can be detected on the left
side of the machine. In this case, the
feeder strip on the right side of the
machine must be lubricated.
3
4
BPXC0238
BPXC0239
10h
10h