X - 1
Malfunctions – Causes and Remedies
10 Malfunctions, Causes and Remedies
• The following is a basic rule for all maintenance, mounting, repair and adjustment tasks:
Bring the machine to a stop. Switch off the engine. Remove the ignition key. Tighten the
flywheel brake.
• Secure the tractor and Big Pack Baler against rolling.
• Secure the knotter against being activated unintentionally with the knotter fuse.
• Activate the flywheel brake and fasten the flywheel in place.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns caused by oils, cleaning agents or solvents, contact a
physician immediately.
• After the upkeep and maintenance tasks are complete, mount all protective coverings and
protective mechanisms properly again.
• Please observe all additional safety instructions as well.
10.1 Safety Instructions
To Next Page
Loading...
