Krone EasyCut B 970 - Safety Equipment

2 Safety
2.7 Safety equipment
30
EasyCut B 970
Original Operating Instructions 150000711_01_en
2.7 Safety equipment
3
1
4
4
2
KMG000-088
Pos. Designation Explanation
1 Stop cocks • When transporting the machine and when
working under the machine, always close the
stop cocks.
2 Support jacks • The support jacks are used to keep the
machine stable when it is not connected to the
tractor, refer to page51.
3 Road travel lighting • The road travel lighting is used for road safety.
• Before driving on roads, switch on the road
travel lighting and ensure that it functions
properly.
4 Overload protection • The overload protection protects the tractor
and the machine from load peaks
 To avoid damaging the machine, switch off the
PTO shaft if the overload clutch engages
continuously.