Waste disposal 16
EasyCut B 970
Original Operating Instructions 150000711_01_en 91
16 Waste disposal
After the service life of the machine has expired, the individual components of the machine must
be disposed of properly. The currently applicable country-specific waste disposal directives and
the concerning valid laws must be observed.
Metal parts
• All metal parts must be brought to a metal recycling centre.
• The parts must be freed from operating fluids and lubricants (gearbox oil, oil from hydraulic
system, ...) before being scrapped.
• The operating fluids and lubricants must be brought separately to an environmentally
friendly disposal point or recycling centre.
Operating fluids and lubricants
• Operating fluids and lubricants (diesel fuel, coolant, gearbox oil, oil from hydraulic system,
…) must be brought to a disposal point for waste oil.
Synthetic materials
• All synthetic materials must be brought to a recycling centre for synthetic materials.
Rubber
• Rubber parts (hoses, tyres, …) must be brought to a rubber recycling centre.
Electronic scrap
• All electronic parts must be brought to a disposal point for electronic scrap.
To Next Page
Loading...
