Krone EasyCut B 970 - Locking; Releasing Stop Cocks; Lowering the Machine from Transport Position to Working Position

8 Operation
8.4 Locking / releasing stop cocks
52
EasyCut B 970
Original Operating Instructions 150000711_01_en
8.4 Locking / releasing stop cocks
KMG000-089
Close
 Move the stop cocks (1) into position (I).
Open
 Move the stop cocks (1) into position (II).
8.5 Lowering the machine from transport position to working position
KMG000-045
From transport position to headland position
 Move the toggle switch (2) to the “up” position.
 Actuate the control unit (2-) until both mowers are lowered to the headland position.
Headland positions
ü The mowers are in the headland position.
 Move the toggle switch (2) to “down” position.
Lowering both mowers simultaneously from the headland position to the working
position
 Move the toggle switch (3) to the “centre” position.
 Move the control unit (1+) to the float position until both mowers are lowered to the working
position.
 To mow, move the control unit (1+) to the float position.