Krone EasyCut B 970 - Connecting Operation Panel

Start-up 7
Connecting operation panel 7.3
EasyCut B 970
Original Operating Instructions 150000711_01_en 45
Control units on the tractor must be used for lifting and lowering the mower and can be locked in
the neutral position to prevent unintentional operation.
 Depressurise the tractor hydraulics.
 Shut down and safeguard the machine, refer to page24.
 Clean and dry the connections of the hydraulic quick connector.
 Connect the hydraulic hose (1+) to a single-acting control unit of the tractor.
7.3 Connecting operation panel
NOTICE
Short circuit caused by impurities and moisture in the plug connection
The machine may be damaged by a short circuit.
 Make sure that the plugs and sockets are clean and dry.
KM000-082
ü The machine is shut down and safeguarded, refer to page24.
Connection operation panel to tractor
 Connect 2-pole plug (2) to 2-pole socket (1) of the tractor.
Connection operation panel to machine
 Connect 14-pole plug (3) with 14-pole socket (4) of the machine.