Krone EasyCut B 970 - Page 76

13 Maintenance - Gearbox
13.2 Main gearbox
76
EasyCut B 970
Original Operating Instructions 150000711_01_en
Changing oil
ü A suitable container is available for escaping oil.
 Unscrew the locking screw of the inspection hole (1) and the locking screw of the filling hole
(3).
 Unscrew the drain plug (2) and drain the oil.
 Mount the drain plug (2), Anziehdrehmoment refer to page69.
 Top up new oil via the filling hole(3) up to the inspection hole(1).
 Mount the locking screw of the inspection hole (1) and the locking screw of the filling hole
(3), Anziehdrehmoment refer to page69.