Krone Round Pack 1250 - Round Baler Hydraulic Circuit Diagram; Drawbar Ring Hitch

IX - 19
Maintenance
RP-A-002
Messer 0
PP
Pick-up
9.5.3 Round Baler Hydraulic Circuit Diagram
9.6 Drawbar Ring Hitch
If the wear limit of the bushing inside
the ring hitch has been reached, the
bushing should be replaced.
The wear limit of the bushing inside the ring hitch (1) is
a = 43 mm. If this value is exceeded, the bushing needs
to be replaced. To minimise wear, clean and grease the
bushing and ring hitch daily.
VP-1-007
a