Krone Round Pack 1250 - Twine Wrapping; Twine and net wrapping

V - 11
Basic Settings and Operation
1 cutter bar
2 twine wrapping mechanism
3 pressure roller
4 rubber roller
5 connecting link guide
6 twine box
7 pressure roller tension spring
8 stepped roller
5.6.2 Components
5.6.2.1 Components twine and net wrapping
RBV00231
6
3
5
7
8
2
4
1
5.6 Twine Wrapping / Twine and net wrapping
5.6.1 Special Safety Instructions
The following general rules apply to all maintenance, assembly, repair and adjustment work:
• Bring the round baler to a complete standstill.
• Switch off the motor, remove the ignition key and disconnect the 12 V supply voltage.
• Secure the tractor and round baler against rolling.
Selecting Twine and Wrapping Material
The selection of binding material is important to ensure troublefree use of the round baler
and storage. High quality binding material also ensures safe handling of round bales during
transport.