KTM 2009 690 Rally Factory Replica User Manual

CONTROLS 15
4.23Disply mode SPEED/A1 (average speed 1)
400325-01
– Press the button briefly and repeatedly until A1 appears at the top right of the
display.
A1 (average speed 1) shows the average speed calculated using TR1 (trip master 1) and
S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the button
briefly.
Next display mode
4.24Display mode SPEED/A2 (average speed 2)
400326-01
– Press the button briefly and repeatedly until A2 appears at the top right of the
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
timed after the ride.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
–
Press the button
briefly.
Next display mode
4.25Display mode SPEED/S1 (stop watch 1)
400327-01
– Press the button briefly and repeatedly until S1 appears at the top right of the
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the button
briefly.
Next display mode
4.26Display mode SPEED/S2 (stop watch 2)
400328-01
– Press the button briefly and repeatedly until S2 appears at the top right of the
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button . Starts or stops S2.
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of S2 and A2 are reset to 0.0.
Press the button
briefly.
Next display mode

KTM 2009 690 Rally Factory Replica Specifications

General

Brand	KTM
Model	2009 690 Rally Factory Replica
Category	Motorcycle
Language	English