MAINTENANCE WORK ON CHASSIS AND ENGINE 69
8.86Cleaning the oil screens x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
– Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
– Place a suitable container under the engine.
600077-10
– Remove plug with oil screen and O-ring.
600079-10
– Remove plug with oil screen and O-ring.
– Completely drain the remaining engine oil.
– Thoroughly clean parts and sealing areas.
600079-11
– Fit and tighten plug with oil screen and O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)
Info
Plugs and and oil screens and are identical.
600077-10
– Fit and tighten plug with oil screen and O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)
To Next Page
Loading...
Need help?
General
