CONTROLS 16
Table of functions
Display Press the button . Press the button . Press the button for 3 -
5 seconds.
Press the button
briefly.
Display mode SPEED/H
(service hours)
No function No function The display changes to
the Setup menu of the
speedometer functions.
Next display mode
Display mode SPEED/CLK
(clock)
No function No function The display changes to
the Setup menu of the
clock.
Next display mode
Display mode SPEED/LAP
(lap time)
Starts or stops the
clock.
Stops the current lap
time and saves it, and
the stop watch starts
the next lap.
The stop watch and the
lap time are reset.
Next display mode
Display mode
SPEED/ODO (odometer)
No function No function – Next display mode
Display mode SPEED/TR1
(trip master 1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/TR2
(trip master 2)
Increases value of TR2. Reduces value of TR2. Deletes value of TR2. Next display mode
Disply mode SPEED/A1
(average speed 1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/A2
(average speed 2)
No function No function – Next display mode
Display mode SPEED/S1
(stop watch 1)
No function No function Displays of TR1, A1 and
S1 are reset to 0,0.
Next display mode
Display mode SPEED/S2
(stop watch 2)
Starts or stops S2. No function Displays of S2 and A2
are reset to 0.0.
Next display mode
Table of conditions and activability
Display The motorcycle is
standing
Menu can be acti-
vated
Display mode SPEED/H (service hours) •
Display mode SPEED/CLK (clock) •
Display mode SPEED/LAP (lap time) •
Display mode SPEED/TR1 (trip master 1) •
Display mode SPEED/TR2 (trip master 2) •
Disply mode SPEED/A1 (average speed 1) •
Display mode SPEED/A2 (average speed 2) •
Display mode SPEED/S1 (stop watch 1) •
Display mode SPEED/S2 (stop watch 2) •
4.27Fuses
600029-10
The fuse box is located under the seat.
To Next Page
Loading...
Need help?
General
