Putting into service
Control box
Quantron S
21
Display configuration
The screen has 2 free display areas. Following values
can be displayed:
- Working speed (Km/h)
- Blower speed
- Metering unit "opening position"
-Time
-Area
- Quantity sown "kg trip"
- Distance covered "m-trip"
- Metering unit rotation speed (min-1)
- As from the "System - Test" menu, select the "display
config" submenu.
- Select the screen area to modify.
- Validate using Enter key.
The list with the functions available appears on the
screen.
- Select the required function that will have to appear.
- Confirm your choice by pressing Enter key.
The screen will now display the required function.
Date/Time
The date and time are factory set.
If necessary, these parameters can be modified in the
"System - Test" menu.
Field data
This menu, accessible under "System - Test", displays
the following data:
- Quantity sown (independently from the seed variety)
- Area sown (2)
- Number of work hours
- Surface covered
Data displayed cannot be modified or deleted.
To Next Page
Loading...