KUHN Venta 3030 - Page 20

Venta 3030-3530-4030
18
4. - Safety
RN034AGB D
Seed Drill
Stage 3:
To measure:
- Total weight (t):
• Tractor + machine (transport position).
• Ballast weights.
Checking:
- To go to the next stage:
• Check in the tractor's operator's manual that the
value measured is below the tractor's Gross
Combined Weight Rating.
To do:
- If t < PTAC go to the next stage.
- If the total unit weight exceeds the tractor Gross
Combined Weight Rating in accordance with the
countrie's legislation, empty the hopper to travel on
public roads.
- Repeat checking procedure.
Example:
• (t) = 10000 kg (24250 lb)
• PTAC = 13000 kg (28660 lb) .
• t < PTAC : Go to the next stage.
kgkg
t = _____kg