KUHN Venta 3030 - Stationary Calibration Test

Venta 3030-3530-4030
84
9. - Instructions for work
RN034AGB D
Seed Drill
9.4.5 Stationary calibration test
Carry out the calibration test with the
machine lowered, the power take-off
disengaged and the tractor stopped. Remove
ignition key.
Determine the adjustment of the opening
according to the indications of the command
terminal.
- Set the opening with the crank (1) to the value of
the control terminal. The right side of the guiding
plate indicates the metering unit opening position
(2).
1
2
- Agitator engaged (1): grass, barley, oats, fescue,
maize....
1