KUHN Venta 3030 - Coupling the Machine

Venta 3030-3530-4030
48
7. - Putting into service
RN034AGB D
Seed Drill
7.4 Coupling the machine
During work, the VENTA 1030 seed drill is always
coupled to a soil preparation machine.
Preconditions:
• The floor work tool is hitched to the tractor.
• The machine rests on stands in hitching position.
• The machine tilts forward.
- Make sure that top link (1) is properly mounted.
1
The top link mount is described in the pre-
delivery instructions (depending upon
specification).