8. - Instructions for transport
Venta 3030-3530-4030
63
RN034AGB D
Seed Drill
8. Instructions for transport
8.1 Putting the machine into
transport position
8.1.1 Steps
Before placing the machine into transport
position:
Check that nobody is within the machine
pivoting area.
If there is someone, make sure the person
moves away.
Before transport, always check that the
hopper cover is correctly locked. Otherwise
the cover may open unexpectedly and cause
injury or property damage.
• Check the transport lock setting.
• See maintenance and storage chapter
The steps must be raised during transport.
- Raise the steps.
To Next Page
Loading...
