77 / 157V3.3 11.07.2007 KRC-AD-KRC2ed05-BA en
6. Transportation
6 Transportation
6.1 Transportation using lifting tackle
Preconditions The control cabinet must be switched off.
No cables may be connected to the control cabinet.
The door of the control cabinet must be closed.
The control cabinet must be upright.
The anti-toppling bracket must be fastened to the control cabinet.
Necessary
equipment
Lifting tackle with or without lifting frame
Procedure 1. Attach the lifting tackle with or without a lifting frame to all 4 transport eye-
bolts on the control cabinet.
2. Attach the lifting tackle to the crane.
3. Slowly lift and transport the control cabinet.
4. Slowly lower the control cabinet at its destination.
5. Detach the lifting tackle from the control cabinet.
Fig. 6-1: Transportation using lifting tackle
1 Transport eyebolts on the control cabinet
2 Correctly attached lifting tackle
3 Correctly attached lifting tackle
4 Incorrectly attached lifting tackle
Danger!
If the suspended control cabinet is transported too quickly, it may swing and
cause injury or damage. Transport the control cabinet slowly.
To Next Page
Loading...
