78 / 157 V3.3 11.07.2007 KRC-AD-KRC2ed05-BA en
KR C2 edition05
6.2 Transportation by pallet truck
Preconditions The control cabinet must be switched off.
No cables may be connected to the control cabinet.
The door of the control cabinet must be closed.
The control cabinet must be upright.
The anti-toppling bracket must be fastened to the control cabinet.
Procedure
6.3 Transportation by fork lift truck
Preconditions The control cabinet must be switched off.
No cables may be connected to the control cabinet.
The door of the control cabinet must be closed.
The control cabinet must be upright.
The anti-toppling bracket must be fastened to the control cabinet.
Procedure
Fig. 6-2: Transportation by pallet truck
1 Control cabinet with anti-toppling bracket
2 Control cabinet in raised position
Fig. 6-3: Transportation by fork lift truck
1 Control cabinet with fork slots
2 Control cabinet with transformer installation kit
To Next Page
Loading...
