130 / 157 V3.3 11.07.2007 KRC-AD-KRC2ed05-BA en
KR C2 edition05
11.12.11Drive bus - KSD-16
Procedure Under "System info", select 1.Drive Bus > 02-KSD-16.
Description The following parameters are displayed:
Fig. 11-20: Drive bus - KSD
Parameter Description
Lecom error Lenze communication error number
Hardware version Control and power units
Date of production Date
Serial number Number
Software version Software version
Rated current
Maximum current
Intermediate voltage
Device load
Heat sink temperature
Polar wheel angle
Voltages, currents and temperatures of the
KSD
Operating time counter Intermediate circuit has been active for xx
hours
Power-on time counter KSD has been active for xx hours
1. and 2. code position Polling of the current error memory and the
last 3 history entries
Code position:
161: current error
162: current error -1
163: current error -2
164: current error -3
To Next Page
Loading...
