Kuka VisionTech 2.1

31 / 109Issued: 11.10.2013 Version: KST VisionTech 2.1 V1
7 Transportation
7 Transportation
7.1 Transportation
Cameras Before transportation, the cameras must be removed. A protective cap must
be mounted on the connection for the process interface / power supply. The
cameras must be packaged for transportation in ESD protection foil. Care
must be taken to ensure that the cameras do not come into contact with hu-
midity.
Switch The switch must be packaged for transportation in ESD protection foil. Care
must be taken to ensure that the switch does not come into contact with hu-
midity.