Kyocera 1650 - Auto Exposure Adjustment; Default Magnification

System Menu
3-6
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Default
Cassette.
3
Press the Enter key.
4
Press the S key or the T key to select the cassette
that will be used with priority.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Default Magnification
Select whether or not to set the auto zoom ratio selection mode when a cassette is selected.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Default
Magnif.
3
Press the Enter key.
4
Press the S key or the T key to select 100% or
Auto %.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Exposure Adjustment
Adjust the overall density in the auto exposure mode.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Adj.Auto
expos.
3
Press the Enter key.
Paper Select
Paper type(Auto)
Copy Default :
Default Cassette
: Auto
: Plain
: casset.1
Default cassette:
Cassette 1
Cassette 2
*
Cassette 3
Paper type(Auto)
Default Cassette
Copy Default :
Default Magnif.
: Plain
: casset.1
: 100%
Default magnification:
100%
Auto %
*
Default Cassette
Copy Default :
Default Magnif.
: casset.1
: 100%
Adj.Auto expos. : 4