Kyocera 1650

Printer Settings
2-28
6
Press the S key or the T key to select Regular or
Dark.
7
Press the Enter key.
8
Press the Reset key. The message display returns to the printer basic screen.
Code Set Selection
With the PCL6 emulation, you can select a code set.
1
Display the Font screen. (See How to Display the Font Screen on page 2-25.)
2
Press the S key or the T key to select Code Set.
3
Press the Enter key.
4
Press the S key or the T key to select the desired
code set.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Font List Printing
1
Display the Font screen. (See How to Display the Font Screen on page 2-25.)
2
Press the S key or the T key to select List of
Inter. Fonts.
Note If optional fonts as well as internal fonts are stored in this machine, you can also select List of
Option Fonts.
3
Press the Enter key.
4
Press the S key or the T key to select Print.
Back
Regular
Courier
Dark
Back
Select Font
Font
Code Set
Code Setting
IBM PC-8
PC-855 Serbia
ISO Cyrillic
Select Font
Font
Code Set
List of Inter. Fonts
No
List of Inter. Fonts
Print