Job Accounting
4-17
Using Job Accounting
Copier Operation
Under job accounting, you can perform copier operation only by inputting your ID-code using the
numeric keys.
Important! Be sure to press the Job Accounting key after
completing copying. The ID-code input screen is
displayed.
1
Input your ID-code using the numeric keys and press
the Enter key. The copier basic screen is displayed.
Notes • If you input an incorrect code, press the Stop/Clear key and input the code again.
• If the input ID-code does not match any registered ID-code, an error sound is emitted. Input the
correct ID-code.
2
Perform normal copier operation.
3
After copying is complete, press the Job Accounting
key.
Printer Operation
Under job accounting, operation on the computer is required for printing. For details, refer to the KX
Printer Driver Operation Guide.
Enter Account ID.
:Confirm
********
To Next Page
Loading...
