Kyocera 1650

Printer Settings
2-3
Menu Hierarchical Diagram
Note > displayed on each setting screen indicates the current setting.
Print Status
Page `
No, Print
e-MPS ` Quick Copy ` Select User
Name `
Select JOB ` Copies: ###
Delete
Private/
Stored `
Select User
Name `
Select JOB ` Copies: ### Enter User ID
Delete
Print VMB
Data `
Tray ### Enter User ID
List of VMB ` No, Print
List of code
JOB `
No, Print
e-MPS
Configuration
`
Quick Copy ` Number of JOB: 0 to 50
Temp Code Job
Size `
0 to 9999 M Byte
Perm Code Job
Size `
0 to 9999 M Byte
VMB Size ` 0 to 9999 M Byte
Interface ` Parallel ` Auto, Normal, High speed, Nibble (high)
Network ` NetWare ` On, Off
Change # ` Auto, 802.3, Ethernet II,
802.2, 802.3 SNAP
TCP/IP ` On, Off
Change # ` DHCP ` On, Off
IP Address ` ###.###.###.###
Subnet Mask ` ###.###.###.###
Gateway ` ###.###.###.###
EtherTalk ` On, Off
Network
Status Page `
On, Off
USB
Option ` NetWare ` On, Off
Change # ` Auto, 802.3, Ethernet II,
802.2, 802.3 SNAP
TCP/IP ` On, Off
Change # ` DHCP ` On, Off
IP Address ` ###.###.###.###
Subnet Mask ` ###.###.###.###
Gateway ` ###.###.###.###
EtherTalk ` On, Off
Opt.
StatusPage `
On, Off