Kyocera 1650

System Menu
3-27
4
Press the S key or the T key to select Other
Regular Size.
5
Press the Enter key.
6
Press the S key or the T key to select the paper size.
7
Press the Enter key. The Bypass Paper type screen is displayed. Proceed to Paper Type
described below.
Inputting a Paper Size
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select Bypass
setting.
3
Press the Enter key.
4
Press the S key or the T key to select Input Size.
5
Press the Enter key.
6
Press the < key or the > key to set the vertical size. You
can set the vertical size to 3
7/8" to 11 5/8" in 1/8"
increments [98 to 297 mm in 1 mm increments].
7
Press the T key to select the horizontal size.
8
Press the < key or the > key to set the horizontal size.
You can set the horizontal size to 5
7/8" to 17" in 1/8"
increments [148 to 432 mm in 1 mm increments].
9
Press the Enter key. The Bypass Paper type screen is displayed. Proceed to Paper Type
described below.
Bypass Paper size:
Other Regular Size
Other Regular Size:
End
System Menu / Counter:
Language
Bypass setting
Bypass Paper size:
Universal Size
Input Size
*
Input size
5
7
8
"
3
7
8
"
Input size
3
7
8
"
"5
7
8