Kyocera 1650

Job Accounting
4-4
Managing Accounts
Registering a New Account
Register a one- to eight-digit ID-code and the limit of use for each account.
1
Display the Job Accounting screen. (See How to Display the Job Accounting Screen on
page 4-3.)
2
Press the S key or the T key to select Edit Job
Accounting.
3
Press the Enter key.
4
Press the S key or the T key to select New
registration.
5
Press the Enter key.
6
Use the numeric keys to input a one- to eight-digit
ID-code. A code from 0 to 99999999 can be input.
Note If you try to register an ID-code that has been already input, an error occurs. Input another ID-code.
7
Press the Enter key.
Note After the ID-code is registered, message Please
wait is displayed for several seconds.
8
Set the limit of use.
Note For the method of setting the limit of use, see Setting Limit of Use on page 4-5.
9
After setting of limit of use is complete, press the S
key or the T key to select End.
10
Press the Enter key.
Job Accountg Def. Set.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
[]On
Delete
Edit Job Accounting:
End
New registration
New registration:
Account ID
Please wait.
Printer
Limit in use:
End
Copy
: Able use
: Able use