Kyocera 1650

Printer Settings
2-20
6
Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
7
Press the > key. Enter the next block of 3 digits of the
address in the highlighted area.
8
Continue the same procedure for the other 2 blocks.
9
Press the Enter key.
Next, set the subnet mask.
Subnet Mask
To register the subnet mask, continue the procedure from step 9 above.
1
Press the S key or the T key to select Subnet Mask.
2
Press the Enter key.
3
Use the same procedure as steps 6 to 8 of IP Address
setting to input the address.
4
Press the Enter key.
Next, set the default gateway.
Default Gateway
To register the default gateway, continue the procedure from step 4 above.
1
Press the S key or the T key to select Gateway.
2
Press the Enter key.
3
Use the same procedure as steps 6 to 8 of IP Address
setting to input the address.
4
Press the Enter key.
5
When you finish making all of the setting, press the Reset key. The message display returns to the
printer basic screen.
IP Address
0 0..00.
IP Address
10 0..00 .
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0..00.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0..00.