Printer Settings
2-51
Other Settings
You can set the following items for other settings.
• Form Feed Timeout
• Received Data Dump
• Printer Function Resetting
• Resource Protect Mode
• Auto Continue
• Duplex Printing Error Detection
• Stapling Error Detection
• Service Status Page Printing
How to Display the Others Screen
1
Press the Printer key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select Others.
5
Press the Enter key. The Others screen is displayed.
Next, perform the setting referring to the following description of each setting item.
Form Feed Timeout
If this machine does not receive any information indicating the end of data after receiving the last
data, the machine waits for a certain time without printing the last page. When the preset time
elapses, the machine performs automatically a form feed. If you set the time to 0, the machine does
not perform a form feed until GO is manually selected.
1
Display the Others screen. (See How to Display the Others Screen on page 2-51.)
2
Press the S key or the T key to select Form Feed
Time Out.
3
Press the Enter key.
4
Press the < key or the > key to set the time. You can
set the time to 0 to 495 seconds in 5 second
increments.
5
Press the Enter key.
GO
CANCEL
Ready
MENU
Menu
RAM Disk Mode
Paper Handling
Others
Back
Form Feed Time Out
Others
Print HEX-DUMP
(0
Form Feed Time Out
30 495)sec.
To Next Page
Loading...
Need help?
General
