Kyocera 1650

Job Accounting
4-16
Operation against Excess over Limit
You can select whether to stop output by prohibiting immediately use of the machine, to stop the
operation from the next job or to display a warning message only, when the limit of count that has
been set with the function of the limit of use is exceeded.
1
Display the Job Accounting screen. (See How to Display the Job Accounting Screen on
page 4-3.)
2
Press the S key or the T key to select Job
Accountg Def. Set.
3
Press the Enter key.
4
Press the S key or the T key to select Excess
limit Set.
5
Press the Enter key.
6
Press the S key or the T key to select Stop job
immediately, Stop after job done or Only
warning.
7
Press the Enter key.
8
Press the S key or the T key to select End.
9
Press the Enter key.
Job Accountg Def. Set.
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
[]On
Excess limit Set.
Job Accounting Default Setting
Scanner Job Accnt
Fax Job Accountng
: Prohibit
: On
: On
Only warning
Excess limit Setting:
Stop job immediately
Stop after job done
*
Prnt Job Account.
Job Accounting Default Setting
End
Copy Job Account.
: On
: On