Kyocera 1650 - Page 58

Printer Settings
2-18
12
Press the Reset key. The message display returns to the printer basic screen.
EtherTalk
When using this machine by connecting to an Apple Macintosh computer, turn EtherTalk On.
1
Display the Interface screen. (See How to Display the Interface Screen on page 2-16.)
2
Press the S key or the T key to select Network.
3
Press the Enter key.
4
Press the S key or the T key to select EtherTalk.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key.
8
Press the Reset key. The message display returns to the printer basic screen.
TCP/IP
When connecting to a Windows network through TCP/IP, turn TCP/IP On.
1
Display the Interface screen. (See How to Display the Interface Screen on page 2-16.)
2
Press the S key or the T key to select Network.
3
Press the Enter key.
4
Press the S key or the T key to select TCP/IP.
5
Press the Enter key.
6
Press the S key or the T key to select On.
Back
Parallel
Interface
Network
Network Setting
NetWare
TCP/IP
EtherTalk
Back
On
EtherTalk
Off
Back
Parallel
Interface
Network
Back
NetWare
Network Setting
TCP/IP
Back
On
TCP/IP
Off