10-16
Troubleshooting > Responding to Error Messages
M
P
Error Message Checkpoints Corrective Actions Reference
Page
Machine failure. — Internal error has occurred. Make a note
of the error code displayed on the touch
panel, and contact your Service
Representative.
—
Maximum number of scanned
pages.
Is the acceptable scanning count
exceeded?
Only one copy of the scanned pages is
available.
Press [Continue] to print, send or store
the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
—
Memory is full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
—
Error Message Checkpoints Corrective Actions Reference
Page
Paper jam. — If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel. Leave the
machine on and follow the instruction to
remove the jammed paper.
10-22
Print overrun. — Warning. Low printer memory. The job
was paused. Re-starting the job. Press
[Continue].
—
To Next Page
Loading...
Need help?
General