4-21
Document Box
JobFinish Notice (Settings for notification when jobs are finished)
The end of a job is notified using E-mail.
1 In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2 Press U or V to select JobFinish Notice.
3 Press [OK]. The JobFinish Notice screen appears.
4 Press U or V to select On.
5 Press [OK]. The Address Entry screen appears.
6 Enter the E-Mail address to be notified.
7 Press [OK]. Register the address and the Function menu
reappears.
Del. after Print (Delete data after printing setting)
Use this setting to specify whether or not the file data is deleted after printing.
1 In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2 Press U or V to select Del. after Print.
Note To send E-mail on this machine, set the SMTP and POP3 settings to On. For details, refer to Protocol Detail
(Detailed settings for the network protocol) on page 6-46.
A mail server must be registered. For the method for setting a server, refer to the Command Center RX User Guide.
Function:
a
b
********************-
2
Collate
3
Offset
1
Paper Output
JobFinish Notic:
a
b
********************-
2
On
1
*Off
Address Entry:
a
b
*
ABC
[ Text ]
Note Up to 128 characters can be entered.
Refer to Character Entry Method on page A-6 for details on
entering characters.
When user login administration is set, the address of the logged in
user is entered.
Function:
a
b
********************-
2
Collate
3
Offset
1
Paper Output
To Next Page
Loading...
