Maintenance
7-2
Toner Container Replacement
When toner runs low, Toner is running out appears in the message display. Make sure you have a new toner
container available for replacement.
When the message display shows Toner is empty., replace the toner.
Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may deteriorate output
quality.
Installation procedures of the toner container is same for every color. The procedures here represent the yellow toner
container.
1 Open the front cover.
2 Turn the toner container release lever to the vertical position.
Note
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine
may cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving
customer convenience, operation of the recycling system for used toner containers, and planning and
development of new products. The stored information does not include information that makes it possible to
identify individuals, and is only used anonymously for the above purposes.
CAUTION Do not attempt to incinerate the toner container or unit. Dangerous sparks may cause burns.
(Y) (C)
(M)
(K)
To Next Page
Loading...
Need help?
General