Operation Panel
6-10
3 Press [OK]. The Collate screen appears.
4 Press U or V to select whether Collate mode is enabled.
5 Press [OK].
The selected mode is set and you return to the function menu.
Offset (Offset Setting)
Set whether each set of printed output is offset from the previous set.
1 In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2 Press U or V to select Offset.
3 Press [OK]. The Offset screen appears.
4 Press U or V to select whether Offset mode is enabled.
5 Press [OK].
The selected mode is set and you return to the function menu.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 6-30.
1 In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2 Press U or V to select Duplex.
Collate:
a
b
1
Off
********************-
2
*On
Function:
a
b
********************-
2
Collate
3
Offset
1
Paper Output
Offset:
a
b
1
Off
********************-
2
*On
Function:
a
b
********************-
2
Collate
3
Offset
1
Paper Output
To Next Page
Loading...
