Preparation before Use
2-2
Power On/Off
Power On
Turn the main power switch on.
Power Off
1 Make sure that the Data indicator off.
2 Press [Menu].
3 Press U or V to select Shut down.
4 Press [OK]. A confirmation screen appears.
5 Press [Yes] ([Left Select]).The display will show "Completed. Turn
the main power switch off.".
6 Switch off the main power switch.
IMPORTANT When turning off the main power switch, do not turn on
the main power switch again immediately. Wait more than 5 seconds,
and then turn on the main power switch.
CAUTION The hard disk may be operating when the Data indicator is lit or blinking. Turning off the main
power switch while the hard disk is operating may cause damage.
Note that when the main power switch is turned off, the machine will be unable to automatically receive print
data from computers.
Shut down.
Are you sure?
[ Yes ] [ No ]
Completed.
Turn the main power
switch off.
To Next Page
Loading...
Need help?
General