6-21
Operation Panel
Media Type (Paper type setting for MP tray)
You can use this to set the paper type that can be supplied from the MP tray. The default setting is PLAIN.
For more information about paper types that you can feed from the MP tray, refer to Paper on page A-9.
1 In the Paper Settings menu, press U or V to select MP Tray Set..
2 Press [OK]. The MP Tray Set. menu screen appears.
3 Press U or V to select Media Type.
4 Press [OK]. The Media Type screen appears listing the media types
that can be supplied from the MP tray.
The available paper sizes are as follows:
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
HighQuality
CUSTOM 1 to 8
5 Press U or V to select the desired media type.
6 Press [OK]. The media type for the MP tray is set and the Paper
Settings menu screen reappears.
MP Tray Set.:
a
b
********************-
2
Media Type
[ Exit ]
1
Paper Size
Media Type:
a
b
********************-
2
Transparency
3
Preprinted
1
*Plain
To Next Page
Loading...
