6-31
Operation Panel
Paper Output (Selecting the Paper Output Location)
This setting can be specified when an optional document finisher is installed.
You can select whether print jobs are output to the top tray of the printer, or to the optional document finisher or mail box.
1 In the Print Settings menu, press U or V to select Paper Output.
2 Press [OK]. The Paper Output screen appears showing the
available output locations.
3 Press U or V to select the desired output location.
The available output locations are as follows:
4,000-Sheet Finisher installed
Job Separator
Tray A
Tray B
Tray 1*
Tray 2*
Tray 3*
Tray 4*
Tray 5*
Tray 6*
Tray 7*
*Tray of optional mail box
1,000-Sheet Finisher installed
Job Separator
Left Tray
4 Press [OK]. The selected output location is stored and the Print
Settings menu reappears.
Note The screen varies depending on the installed options.
Paper Output:
a
b
********************-
2
Tray A
3
Tray B
1
*Job Separator
Note The screen shown appears when a 4,000-Sheet Finisher is
installed.
To Next Page
Loading...
