Operation Panel
6-54
Data Encryption (Data Encryption setting)
This sets the encryption method.
1 In the Encryption menu, press U or V to select Data Encryption.
2 Press [OK]. The Data Encryption screen appears.
3 Press U or V to select the desired encryption method.
4 Press [OK]. The Encryption menu reappears.
WEP Key (WEP Key settings)
This registers the WEP Key.
1 In the Encryption menu, press U or V to select WEP Key.
2 Press [OK]. The WEP Key screen appears.
3 Press[Edit] ([Right Select]). The WEP Key entry screen appears.
4 Enter the WEP Key using the numeric keys.
5 Press [OK]. The Encryption menu reappears.
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 6-53.
Disable or WEP can be selected when Open or Shared is
set.
TKIP, AES or Auto can be selected when PA-PSK or WPA2-
PSK is set.
Data Encryption:
a
b
********************-
2
*WEP
1
Disable
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-6.
WEP Key:
a
b
zzzzzzzzzz
[ Edit ]
WEP KEY:
a
b
zzzzzzzzz
*
ABC
[ Text ]
To Next Page
Loading...
