Kyocera ECOSYS M4125idn

8-43
System Menu > [System/Network]
Item Description
IPP over SSL Select whether to use IPP to receive documents secured by SSL. To use the IPP protocol,
set [IPP] and [SSL] to [On]. The default port number is 443.
*1*2
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Protocol Settings Select whether to receive documents using Raw Port.
*1
Value: Off, On
Direct SMTP Port
Number
Specifies the port number used. The default port number is 4000.
Value: 1 to 32767
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)
Raw Port ―
Protocol Settings Select whether to receive documents using Raw Port.
* 1
Value: Off, On
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)